We finally bought the door hardware!!! It was quite a process because trying to find someone who carried what we wanted was hard. Most locksmiths would only have a small sample of Emtek hardware.
Brian and I drove to stores in Belleville, Kingston where ever we saw the possibility of finding a sample.
It turns out we should have looked at a place a block from here. We went for a walk one day and stopped in and Mike had a nice selection of hardware for us to see and feel.
Once the order was placed it only took two tries at it to get it right since Emtek only sent part of the order the first time.
As per usual when Brian went to install the first lock he discovered that not only are the doors not all square some are installed too far into the room to and have to be moved out for trim.
Then he discovered that the doors, which came pre-hung, were not sitting in the frame properly because they were not mounted in the hinges evenly. It explains why some of the doors would not close properly.
Ah well we will get them done.
E/B
Brian and I drove to stores in Belleville, Kingston where ever we saw the possibility of finding a sample.
It turns out we should have looked at a place a block from here. We went for a walk one day and stopped in and Mike had a nice selection of hardware for us to see and feel.
Once the order was placed it only took two tries at it to get it right since Emtek only sent part of the order the first time.
As per usual when Brian went to install the first lock he discovered that not only are the doors not all square some are installed too far into the room to and have to be moved out for trim.
Then he discovered that the doors, which came pre-hung, were not sitting in the frame properly because they were not mounted in the hinges evenly. It explains why some of the doors would not close properly.
Ah well we will get them done.
![]() |
There is such a difference in the feel and heft of these handles. |
![]() |
Cutting out insulation and levelling the door. |